FACTOIDS & TRIVIA
The F-65CE was introduced in 1992 as the top model of Guild's acoustic-electric collection. It has a laminated maple, small jumbo body with an arched back and a solid spruce X-braced top. The bracing is straight, not scalloped to help resist feedback. Guild designers chose an oval, rather than round, soundhole for the guitar. Noted luthier James D'Aquisto believed that oval soundholes project sound better on flattop guitars. The earliest F-65CEs have tortoise pickguards while the later versions, like the one here, were fitted with a black pickguard. Of course, exceptions exist. This guitar is also part of the "Rhode Island Series" which had fancier inlays. In this case, malachite in place of abalone. As with all acoustic-electric guitars, the acoustic tone is a bit of a compromise, but in the Guild's case it is completely adequate and acceptable. The Fishman electronics, while outdated by today's standards, are competent and nearly devoid of the dreaded piezo quack tone.
GUILD F-65CE (1994)
Body: Hollow; solid 2-piece Sitka spruce top, laminated flame maple back and sides; 9-ply bound top and back
Finish: Natural, nitrocellulose
Neck: 3-piece maple, set-in; black headstock overlay with mother of pearl logo and malachite G-shield inlay
Fingerboard: Ebony; mother of pearl block markers with malachite inserts
Number of Frets: 20
Pickguard: Black plastic
Bridge: Ebony with Micarta saddle, malachite triangle inlays
Nut: Micarta
Tuners: Grover Rotomatic, gold
Pickup: Fishman Matrix Pro
Controls: Volume, phase, 4-band EQ
Scale Length: 25 5/8 inches
Neck Width at Nut: 1 5/8 inches
Body Width at Lower Bout: 16 inches
Body Depth: 3 inches
Weight: 5.9 lb