FACTOIDS & TRIVIA
Late in 1988, Guild introduced a less ornate version of
the X-170 and dubbed it the X-160 Savoy and X-161
Savoy.
Where the X-170 had a bound fingerboard with
block markers and gold hardware, the X-160 had an unbound fingerboard
with dot markers and chrome hardware. The X-160 was available with an
optional Bigsby tailpiece and finished in exciting colors such as
amber sunburst, cherry sunburst, transparent charcoal, and black as
well as jazz-standard natural. Structurally the X-160 and X-170 were
the same and, of course, sounded the same. The X-160 was made
for
a short time from 1988-94 with a total production of only around 350
guitars. The nomenclature for this particular model is very
confusing because the Savoy name was used for the X-150 of the 1950s
and 1960s as well as the re-imagined X-150 and X-150D of the late 1990s
and early 2000s. To further add to the confusion, Guild also re-used
the X-160 name in the late 1990s and early 2000s for a model completely
different than the X-160 shown here. And then there's the
X-161
which, in the catalogs, seemed to designate the guitar was fitted with
a Bigsby, but this is not always the case. Very confusing.
GUILD X-160 (1989)
Body:
Hollow; laminated 1-piece flame maple top, back, and sides; triple
bound top and back
Finish: Cherry Sunburst, nitrocellulose lacquer
Neck: 3-piece mahogany/maple/mahogany, set-in; black plastic headstock overlay with pearloid logo and Chesterfield inlay
Fingerboard: Indian rosewood, pearloid dot markers
Number of Frets: 20
Pickguard: 5-ply black/white laminated plastic
Bridge: Bigsby aluminum on rosewood base with Guild/Bigsby B-2 tailpiece
Nut: Micarta
Tuners: Grover Rotomatic, chrome
Pickups: Two, Guild HB-1 humbucking with adjustable pole pieces, chrome
Controls: Volume and tone for each pickup, 3-way pickup selector
Scale Length: 24 3/4 inches
Neck Width at Nut: 1 5/8 inches
Body Width at Lower Bout: 16 5/8 inches
Body Depth: 2 1/2 inches
Weight:
7.9 lb
Back
to the Guild Guitar and Amp Pix Menu